Thursday, March 31, 2011

Simple Marshmallow Dart

  • 2 9 inch pipe segments
  • 1 5 inch pipe segment
  • 1 T connector
  • 1 End cap
All pipe should be the same diameter. Recommended diameter is 1/2 inch or 3/4 inch.

  1. Lay the two 9 inch pipe segments in a horizontal line. Connect in the middle with the straight openings of the T connector.
  2. Insert the 5 inch pipe segment in the remaining T connector opening. Place the end cap on the opposite end.
  3. Push a mini-marshmallow as far into one end of the open pipe as possible. Blow on that end, and the marshmallow will shoot out the other end.
  • Paint the dart in camo colors.

No comments:

Post a Comment